3% Surprise discount for New Users: TT3
-34.7%
TwoTrees 3D Printer Photopolymer Resin 1kg
€32.00
| Product | Discount | Coupon Code |
| All Order | 3% OFF | TT3 |
Beschreibung
Product features
1. With fine surface quality, it can be tapped to mount workpieces, etc.
2. High strength and precision, the finished product has good toughness, excellent shape and good impact resistance.
3. It can be cut by knife, has the characteristics of hand-carving, and the surface is scratch-resistant after deep curing.
Recommended pressure parameters
| recommended printing time | 25 ~ 30S for the bottom plate, 2.5 ~ 3.5S for each layer (light intensity 3500 ~ 4500 μw/㎝²). |
| bottom lifting distance | 6mm |
| lifting distance | 6mm |
| bottom lifting speed | 60 mm/min |
| lifting speed | 80 mm/min |
| return speed | 150 mm/min |
| absorption band | 385 ~ 410nm |
Forming test requirements and technical parameters by figure:
1. moulding test environment and standards:
| temperature | 23 ± 2 ℃ |
| Relative humidity | 50% RH ± 5% RH |
| Test probe standard | ASTM |
| Post-curing conditions | put the test strips in water under 200mw/cm² of 405-band UV light and post-cure for 1 minute on the front and back sides. |
2. technical parameters after moulding:
| maximum force (KGF) | 162.76 ± 10%. |
| tensile strength (MPa) | 38.36 ± 10% |
| deformation of the maximum force point (mm) | 6.80 ± 10%. |
| elongation at yield point (%) | 7.22 ± 10% |
| elongation at break (%) | 35.44 ± 10% |
| maximum bending strength (MPa) | 44.15 ± 10% |
| bending modulus of elasticity (MPa) | 979.24 ± 10% |
| Shore hardness (D) | 80 ~ 88 |
| impact strength (J/m) | 454.37 ± 10% |
| tensile modulus (MPa) | 447.12 ± 10% |
Zusätzliche Informationen
| Gewicht | 1 kg |
|---|---|
| Color | Black, Grey, Skin, White |
